Cheat Code Class 1 Chassis

The all NEW Titanium Cheat Code class 1 chassis was designed using the same DNA as our popular CCV3 to bring you the most advanced C1 chassis on the market. 

• 0 degree class 1 legal chassis
• Chassis was developed to be used specifically with our very popular double bend links in mind. This allowed us to create the most optimal and smooth breakover angle of any C1 on the market.
• We gave you the industry's first upper link adjustments in the 1/24 scale crawlers and have also incorporated it into the C1 chassis as well.
• Incorporates our upper link adjustments as we have used since the beginning, also allowing for our links to be ran inboard or outboard.
• The shock towers still have the 15-hole adjustment in the front, but an extra 6 holes added to the rear tower to give more shock options and adjustment when using C-bolt length links.
• Option to run battery forward. This will help counteract the rear weight bias produced when running rear facing motor setups.
• Chassis includes 2 body mag mounts, 1 raised front body mount and 1 rear flush mount. Both mounts now have a 6 hole pattern to allow for the most amount of shock and body mounting options. Magnets included!
• All parts are professionally printed via Nylon MJF. All threaded holes are properly sized to make assembly easy and the most solid out there. 
• We designed the chassis around C-10 and C-bolt links and the rear rails cover both to stay legal, If you decide to run longer rears chassis can be kept legal with many simple solutions to extend the rail to cover the midpoint of the axle tube.
• We recommend bumpers being mounted directly to the body as allowed by the rules to gain the most amount of ascent and descent angle.

All Ti Cheat Code chassis rails, prints, and even down to the nuts are made right here in the USA!

Don't just crush the competition make them feel cheated!

Chassis kit includes 15 m1.4 nuts for assembly as well as 6 magnets for mounting body.

Use BLUE Thread Locker on all m1.4 nuts!

Use E6000 or Shoe Goo adhesive for glueing magnets to mounts and body!

Grab a hardware kit along with your chassis as it comes with all size m1.4mm to do multiple chassis. 12mm long screws needed for lower links!

We recommend a pin vise and a 1mm drill bit be used to clear all holes of any potential debris left behind during the print process. This is not necessary and is rare to happen but will not be apparent until it’s too late.